3Ware 9500S-8 Installation Guide - Page 14
Start 3BM the 3ware BIOS Manager., Driver Installation Under Linux - windows 8
UPC - 693494950083
View all 3Ware 9500S-8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Overview Check the motherboard boot sequence. Refer to your system BIOS guide for more details. Configure RAID units. The basic steps are listed here. For details, see "Configuring Units" on page 27. a Start 3BM (the 3ware BIOS Manager). b Select the drives to be included and indicate that you want to create a disk array. c Select the desired RAID configuration. d Set other parameters, depending on the type of RAID con- figuration. e Confirm the array configuration. f Save your changes and exit. Specify a hot spare (optional). Install the 3ware driver and make the units available to the operating system. For details see one of the following: "Driver Installation Under Windows" on page 53 "Driver Installation Under Linux" on page 65 "Driver Installation Under FreeBSD" on page 87 6 3ware 9000 Series Serial ATA RAID Controller Installation Guide