3Ware 9500S-8 Installation Guide - Page 48
Specifying the Unit Configuration, Basic Steps for Creating a Unit - specifications
UPC - 693494950083
View all 3Ware 9500S-8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Configuring Units Table 4: Working in 3BM To do this Exit the utility and save or abandon all changes. Exit the utility and save all changes Use these keys Esc F8 Specifying the Unit Configuration You can implement one or more units of supported RAID levels on a single controller, depending on the number of drives that the specific 3ware RAID controller supports and the number of drives attached. Basic Steps for Creating a Unit The process of configuring your RAID units includes these main steps, which are detailed in the step-by-step example: Select the drives to be included and indicate that you want to create a disk unit Choose the desired RAID configuration Set other parameters, depending on the type of RAID configuration Confirm the unit configuration Save your changes To select the drives and create a disk unit 1 Select the drives to be included by highlighting each one and pressing Enter to select it. When you select a drive, an asterisk appears next to it in the left-most column (see Figure 10). 40 3ware 9000 Series Serial ATA RAID Controller Installation Guide