3Ware 9550SX-8LP Quick Installation Guide - Page 25

Finishing Up Table 1: LED Indicator Pin Positions Controller 9550SX-16ML LED Header Pin Pair J7 : : : : : 0 1 2 3 All Comment Orientation Horizontal Port number/NU (Not Used) J8 : : : : : Orientation Horizontal 4 5 6 7 All Port number/NU (Not Used) J9 : : : : : Orientation Horizontal 8 9 10 11 All Port number/All (all activity indicator) J1 : : : : : Orientation Horizontal 12 13 14 15 Port number/All (all activity All indicator) k-cathode-minus is on the top a-anode-plus is on the bottom Finishing Up After you have installed the controller in the computer and attached appropriate cables to the controller and drives, complete the following steps to complete the hardware installation. Check Installation and Close the Case 1 Verify that the cables do not interfere with the operation of any other components in the case or block the flow of cooling air. 2 Close the case and reconnect the power cables. Configure your RAID Arrays Turn to "Configuring Units" in 3ware 9550SX Serial ATA RAID Controller User Guide for information about configuring RAID arrays. www.3ware.com 21