AEG A72700GNX0 Product Manual - Page 9

Helpful Hints And Tips

Page 9 highlights

ENGLISH 9 4.4 Removal of freezing baskets and glass shelves from the freezer 2 1 Some of the freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the freezer, pull the basket towards yourself and, upon reaching the end point, remove the basket by tilting its front upwards At the time of putting it back, slightly lift the front of the basket to insert it into the freezer. Once you are over the end points, push the basket back in their position. The appliance is equipped with shelf stops to secure the shelves. The shelves must be lifted up (1) on each 1 side and than pulled outwards (2). The glass shelves equipped with ex- pander rollers are secured with locking pins. 2 1 To remove them proceed as follow: 1. Use a screwdriver to loosen the locking pin on each side on the expander roller. 2. Then pull out both locking pin (1). 1 3. Then pull the glass shelf outwards (2). 1 12 5. HELPFUL HINTS AND TIPS 5.1 Normal Operating Sounds • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct. • When the compressor is on, the refrigerant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor. This is correct.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

4.4
Removal of freezing baskets and glass shelves from the
freezer
2
1
Some of the freezing baskets have a limit
stop to prevent their accidental removal
or falling out. At the time of its removal
from the freezer, pull the basket towards
yourself and, upon reaching the end
point, remove the basket by tilting its
front upwards
At the time of putting it back, slightly lift
the front of the basket to insert it into
the freezer.
Once you are over the end points, push
the basket back in their position.
1
2
1
The appliance is equipped with shelf
stops to secure the shelves.
The shelves must be lifted up (1) on each
side and than pulled outwards (2).
The glass shelves equipped with ex-
pander rollers are secured with locking
pins.
2
1
1
1
To remove them proceed as follow:
1.
Use a screwdriver to loosen the lock-
ing pin on each side on the expand-
er roller.
2.
Then pull out both locking pin (1).
3.
Then pull the glass shelf outwards
(2).
5.
HELPFUL HINTS AND TIPS
5.1
Normal Operating Sounds
You may hear a faint gurgling and a
bubbling sound when the refrigerant
is pumped through the coils or tubing.
This is correct.
When the compressor is on, the refrig-
erant is being pumped around and
you will hear a whirring sound and a
pulsating noise from the compressor.
This is correct.
ENGLISH
9