AEG AXP34U338CW User Manual - Page 17

ENGLISH 17 How to Use the Remote Control TURNING THE UNIT ON Plug in the unit, then press the "on/off" button (when turned on, the unit will operate as the last setting before shutdown. To switch the unit off, press "on/off" button again, then remove the plug. Always switch the unit off by pressing the "on/off" button and wait for few minutes before removing the plug. "high", "mid" or "low" by pressing the Fan speed button and referring to the diagram. Note: In this mode, the air exhaust hose does not need to be connected. Cool mode Press the "mode" button until the left side of LCD screen displays "cool". Press the "fan speed" button to choose the fan speed "auto", "high", "mid", and "low". Press the " " and " " button to choose the temperature you want. Dry mode Press the "mode" button until the left side of LCD screen displays "dry". At the same time, the "low" fan symbol appears on the screen. Note: In this mode, fan speed cannot be selected. Heat mode (For Heat & Cool models only) Press the "mode" button until the left side of LCD screen displays "heat". Press the "fan speed" button to choose the fan speed "auto", "high", "mid", and "low". Press the " " and " " button to choose the temperature you want. AUTO mode Press the "mode" button until the upper side of LCD screen displays "auto". Under AUTO mode, you can not select the fan speed. Press the " " and " " button to choose the temperature you want. Fan mode Press the "mode" button until the left side of LCD screen displays "fan". In this mode, you can select fan speed Sleep mode When the unit is in Cool, Heat or auto mode, you can press the "sleep" button to make the unit run in Sleep mode. In this mode, the fan speed will be set as "auto" automatically, which cannot be changed. In Cool/Heat mode the selected temperature will increase/decrease by 1°C 30 minutes after the mode is selected. The temperature will then increase/decrease by another 1°C