AEG F67732W0P Product Manual - Page 11

Options

Get AEG F67732W0P PDF manuals and user guides View all AEG F67732W0P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

ENGLISH 11 dispenser is activated (factory setting). 3. Press Start to change the setting. = the rinse aid dispenser is deactivated. 7. OPTIONS 4. Press the on/off button to confirm the setting. Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deactivate one or more of them. Only the indicators of the options still active will stay on. 7.1 Multitab Activate this option when you use multitablets that integrate the salt, rinse aid and detergent functions. They can also contain other cleaning or rinsing agents. This option deactivates the release of salt. The salt indicator does not come on. This option also deactivates the release of rinse aid but only when the rinse aid dispenser is deactivated, (rinse aid indicator does not come on). If the rinse aid dispenser is activated, rinse aid is released even with the option Multitab activated. With the use of this option the programme duration is prolonged to increase the cleaning and drying results with the use of multi-tablets. Multitab is not a permanent option and must be selected at every cycle. How to activate Multitab Press Option until the indicator comes on. 7.2 TimeSaver This option increases the pressure and the temperature of the water. The washing and the drying phases are shorter. The total programme duration decreases by approximately 50%. The washing results are the same as with the normal programme duration. The drying results can decrease. How to activate TimeSaver Press Option until the indicator comes on. If the option is not applicable to the programme, the related indicator does not come on or it flashes quickly for a few seconds and then goes off. The display shows the updated programme duration. 7.3 ExtraHygiene This option provides better hygiene results by keeping the temperature at 70 °C for at least 10 minutes during the last rinsing phase. The ExtraHygiene option combined with the programme PREWASH , allows to clean thoroughly and to sanitize the inside of the appliance. The duration of the programme PREWASH will increase when used with the ExtraHygiene option. The display shows the updated programme duration. We recommend the ''sanitisation'' of the appliance before and after a long absence (e.g. holidays).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
dispenser is activated (factory
setting).
3.
Press
Start
to change the setting.
= the rinse aid dispenser is
deactivated.
4.
Press the on/off button to confirm
the setting.
7.
OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1
Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt. The salt indicator does not come on.
This option also deactivates the release
of rinse aid but only when the rinse aid
dispenser is deactivated, (rinse aid
indicator does not come on). If the rinse
aid dispenser is activated, rinse aid is
released even with the option Multitab
activated.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
How to activate Multitab
Press
Option
until the indicator
comes
on.
7.2
TimeSaver
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
How to activate TimeSaver
Press
Option
until the indicator
comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
7.3
ExtraHygiene
This option provides better hygiene
results by keeping the temperature at 70
°C for at least 10 minutes during the last
rinsing phase.
The ExtraHygiene option combined with
the programme PREWASH
, allows to
clean thoroughly and to sanitize the
inside of the appliance.
The duration of the programme
PREWASH
will increase when used
with the ExtraHygiene option. The
display shows the updated programme
duration.
We recommend the ''sanitisation'' of the
appliance before and after a long
absence (e.g. holidays).
ENGLISH
11