AEG IKE8575HFB User Manual - Page 18
Authorised Service Centre. Give the data
View all AEG IKE8575HFB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Problem Possible cause Remedy You cannot select the maximum heat setting for one of the cook‐ ing zones. The other zones consume the maxi‐ Reduce the heat setting of the other mum available power. cooking zones connected to the same Your hob works properly. phase. Refer to "Power management". An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactivated. You put something on one or more sensor fields. Remove the object from the sensor fields. The hob deactivates. You put something on the sensor field . Remove the object from the sensor field. Residual heat indicator does not come on. The zone is not hot because it oper‐ If the zone operated sufficiently long to ated only for a short time or the sen‐ be hot, speak to an Authorised Service sor is damaged. Centre. You use a very tall pot which blocks Use a smaller pot, change the cooking the signal. zone or operate the hood manually. The control panel becomes hot to The cookware is too large or you put Put large cookware on the rear zones, the touch. it too close to the control panel. if possible. There is no sound when you touch the panel sensor fields. The sounds are deactivated. Activate the sounds. Refer to "Daily use". The indicator above the symbol comes on. Child Safety Device or Lock oper‐ ates. Refer to "Daily use". The control bar blinks. There is no cookware on the zone or Put cookware on the zone so that it the zone is not fully covered. fully covers the cooking zone. The cookware is unsuitable. Use cookware suitable for induction hobs. Refer to "Hints and tips". The diameter of the bottom of the Use cookware with correct dimen‐ cookware is too small for the zone. sions. Refer to "Technical data". and a number come on. There is an error in the hob. Deactivate the hob and activate it again after 30 seconds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre. 9.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The information about guarantee period and Authorised Service Centres are in the guarantee booklet. 18 ENGLISH