AEG IKE8575HFB User Manual - Page 7
Installation
View all AEG IKE8575HFB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
• Disconnect the appliance from the mains supply. • Cut off the mains electrical cable close to the appliance and dispose of it. 3. INSTALLATION WARNING! Refer to Safety chapters. 3.1 Before the installation Before you install the hob, write down the information below from the rating plate. The rating plate is on the bottom of the hob. Serial number 3.2 Built-in hobs Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards. 3.3 Connection cable • For a single phase or two phase connection, use the cable type: H03V2V2F or H05BB-F which withstands a temperature of 90 °C or higher. • To replace the damaged mains cable, use the cable: H03V2V2-F or H05BB-F which withstands a temperature of 90 °C or higher. Contact an Authorised Service Centre. The connection cable may only be replaced by a qualified electrician. 3.4 Assembly If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances. min. 500mm min. 50mm If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process. Combination with standard oven 780 520 75 335 23 44 550 min. 55 490+1 750+1 max R5 min. 1500 min.min. min. 12 55 28 ENGLISH 7