AEG L7FE7461BI User Manual - Page 11
Building - dimensions
View all AEG L7FE7461BI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Ø 40 mm ENGLISH 11 To a stand pipe with vent-hole Directly into a drain pipe at a height of not less than 60 cm (23.6") and not more than 100 cm (39.3"). The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 40 mm - min. 1.6") must be larger than the external diameter of the drain hose. To a sink spigot Put the drain hose in the spigot and tighten it with the supplied cable tie L. Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink. max.600 mm To a wall-pipe Directly to a built-in drain pipe in the room L wall and tighten it with the supplied cable tie L. You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension. 3.7 Building in min.600 mm min. 560 mm min. 820 mm 16-22 mm This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in this picture. For recess with a height different than 820 mm, it is possible to buy the appropriate kit on the website.