AEG L7FE7461BI User Manual - Page 8

Installation on suspended, flooring - manual

Page 8 highlights

8 www.aeg.com 6. Remove the three bolts, the hose holders and plastic spacers by using the spanner supplied with the appliance. 7. Close the holes with the plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two F bigger caps G in lower holes. G We recommend that you keep the packaging and the transit bolts for any movement of the appliance. 3.4 Installation on suspended flooring Suspended wooden floors are particularly susceptible to vibration. To limit vibration we recommend placing a waterproof wooden panel, at least 15 mm thick, under the appliance. It should be screwed to at least 2 floor beams and should extend beyond the front feet. If possible, install the appliance where the floor is more stable.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

6.
Remove the three bolts, the hose
holders and plastic spacers by using the
spanner supplied with the appliance.
F
G
7.
Close the holes with the plastic caps
you find in the user manual bag. Put the
smallest cap
F
in upper hole and the two
bigger caps
G
in lower holes.
We recommend that you keep the packaging and the transit bolts for any
movement of the appliance.
3.4
Installation on suspended
flooring
Suspended wooden floors are
particularly susceptible to vibration.
To limit vibration we recommend placing
a waterproof wooden panel, at least 15
mm thick, under the appliance. It should
be screwed to at least 2 floor beams and
should extend beyond the front feet.
If possible, install the appliance where
the floor is more stable.
www.aeg.com
8