AEG L8FBE961R User Manual - Page 33
Problem, Possible solution
View all AEG L8FBE961R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH 33 Problem Possible solution The appliance does not fill with water properly. • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged. • Make sure that the inlet hose has no kinks, damages or bends. • Make sure that the connection of the water inlet hose is correct. The appliance fills with • Make sure that the drain hose is in the correct position. The water and drains immedi- hose may be positioned too low. Refer to 'Installation in- ately struction'. The appliance does not drain the water. • Make sure that the sink spigot is not clogged. • Make sure that the drain hose has no kinks or bends. • Make sure that the drain filter is not clogged. Clean the fil- ter, if necessary. Refer to 'Care and cleaning'. • Make sure that the connection of the drain hose is correct. • Set the drain programme if you set a programme without drain phase. • Set the drain programme if you set an option which ends with water in the tub. The spin phase does not operate or the washing cycle lasts longer than usual. • Set the spin programme. • Make sure that the drain filter is not clogged. Clean the fil- ter, if necessary. Refer to 'Care and cleaning'. • Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. There is water on the floor. • Make sure that the couplings of the water hoses are tight and there is not water leakages. • Make sure that the water inlet hose and the drain hose have no damages. • Make sure you use the correct detergent and the correct quantity of it. • Make sure that a washing programme that ends with water in tub, has been selected. • Make sure that the washing programme is finished. You cannot open the appliance door. • • Set the drain or the spin programme if there is water in the drum. Make sure that the appliance receives electrical power. • This problem may be caused by a failure of the appliance. Contact the Authorised Service Centre. If you need to open the door, please read carefully «Emergency door opening».