AEG T6DBG721N User Manual - Page 5

Safety Instructions

Get AEG T6DBG721N PDF manuals and user guides View all AEG T6DBG721N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

ENGLISH 5 • Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer. • Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer. • Fabric softeners, or similar products, should only be used as specified by the product manufacturer's instructions. • Remove all objects from items that could be a source of fire ignition such as lighters or matches. • Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. • Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. 2. SAFETY INSTRUCTIONS 2.1 Installation • Remove all the packaging. • Do not install or use a damaged appliance. • Follow the installation instruction supplied with the appliance. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Do not install or use the appliance where the temperature can be less than 5°C or higher than 35°C. • The floor area where the appliance is to be installed must be flat, stable, heat resistant and clean. • Make sure that there is air circulation between the appliance and the floor. • Always keep the appliance vertical when being moved. • The rear surface of the appliance must be put against the wall. • When the appliance is in its permanent position, check that it is fully level with the aid of a spirit level. If it is not, adjust the feet accordingly. 2.2 Electrical connection WARNING! Risk of fire and electrical shock. • The appliance must be earthed. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
•
Items that have been soiled with substances such as
cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, waxes and wax removers should
be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.
•
Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothes
or pillows fitted with foam rubber pads should not be
dried in the tumble dryer.
•
Fabric softeners, or similar products, should only be
used as specified by the product manufacturer’s
instructions.
•
Remove all objects from items that could be a source
of fire ignition such as lighters or matches.
•
Never stop a tumble dryer before the end of the
drying cycle unless all items are quickly removed and
spread out so that the heat is dissipated.
•
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
2.
SAFETY INSTRUCTIONS
2.1
Installation
•
Remove all the packaging.
•
Do not install or use a damaged
appliance.
•
Follow the installation instruction
supplied with the appliance.
•
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
•
Do not install or use the appliance
where the temperature can be less
than 5°C or higher than 35°C.
•
The floor area where the appliance is
to be installed must be flat, stable,
heat resistant and clean.
•
Make sure that there is air circulation
between the appliance and the floor.
•
Always keep the appliance vertical
when being moved.
•
The rear surface of the appliance
must be put against the wall.
•
When the appliance is in its
permanent position, check that it is
fully level with the aid of a spirit level.
If it is not, adjust the feet accordingly.
2.2
Electrical connection
WARNING!
Risk of fire and electrical
shock.
•
The appliance must be earthed.
•
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
•
Always use a correctly installed
shockproof socket.
•
Do not use multi-plug adapters and
extension cables.
•
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
ENGLISH
5