AEG T76280AC Product Manual - Page 22

22 www.aeg.com • Make sure not to squash or cause damage to the mains plug and cable behind the appliance. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • The plug must be dry. The data about mains voltage, type of current and the necessary fuse are on the rating plate and in the "TECHNICAL INFORMATION" chapter. The rating plate is behind the load door (see the "PRODUCT DESCRIPTION" chapter). The appliance has a power supply cable with plug fitted with 13 A fuse. If necessary, replace the fuse in the plug by 13 A ASTA BS 1363/A approved fuse. The wires in the power supply cable are coloured as follow: A B C D A) green and yellow - ground - earth (E) B) brown - live (L) C) cord clamp D) blue - neutral (N) The green and yellow coloured wire must be connected to the terminal with E mark or the ground mark or the green and yellow coloured terminal. The blue coloured wire must be connected to the terminal N or black coloured . The brown coloured wire must be connected to the terminal L or red coloured . The wires of the cable must be no cut or stray strands of wire present and the cable clamp must be secure over the outer sheath. Permanent connection The necessary condition of permanent connection is to install a double-pole isolating switch directly on the supply terminals. The type of switch must be correct for the necessary load and must align with applicable electrical requirements. The switch must not break the yellow and green coloured ground wire. 13. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.