AIWA CA-DW235 Operating Instructions - Page 7
Ill II
View all AIWA CA-DW235 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
"c:; 3-MODE VOLUME QS'OURND EcI-ll--II-IIII-fl_l-1 VOLUME Press VOLUME A or 7. The volume level is displayed as a number from O to MAX (25). q The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. To display the vollume level when CD function is selected Press VOLUME A or 7. The volume level is displayed for 4 seconds. 3-MODE EQUALIZER Press one of the 3-MODE EQUALIZER buttons and the indicator of the selected setting lights up. To cancel, press the selected setting. ROCK - Emphasizes the high and low range of music. POP - Emphasizes voice and midrange of music. JAZZ - Emphasizes the low range of music. Connect a microphone with a mini plug to the MIC jack and play a source to be mixed. To record the microphone mixing sound, insert a tape in deck 1 and press q REC. q During dubbing at high speed, the microphone mixing sound is not recorded. MIC VOL - Adjusts the microphone volume. If a howling sound is produced, turn the volume down. q To prevent howling, hold the microphone away from the speakers. The use of unidirectional type microphones is also recommended. QSOUND system This system provides a rich, three dimensional sound area for stereo sources. You can enjoy more enhanced sound. Press QSOUND and the QSOUND indicator lights up. q At higher volumes, turning QSOUND on may cause sound distortion. In this case, make the volume down. To listen with the headphones Connect headphones with a stereo mini plug to the PHONES jack. If an erroneous display or malfunction occurs Make sure that none of the deck operation buttons is pressed. Press s while pressing POWER/(!) STANDBY. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. ENGLISH 7