AIWA CDC-X204 Operating Instructions - Page 13

ADDITIONAL INFORMATION Maintenance Cleaning the front panel Wipe the surface with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners. Cleaning the connectors The connectors need to be cleaned occasionally. Wipe the surface of the connectors with a cotton swab slightly moistened with alcohol. Main unit Removing the unit 1 Remove the protection collar. • Detatch the front cover (page 4). • Engage the release keys together with the protection collar. Orient the release key correctly. © Pull out the release keys to remove the protection collar. Back of the front panel Notes • For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. • Never touch the connectors directly with your fingers or with any metal device. Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. 2 Remove the unit. • Insert both release keys together until they click. Face the hook inwards. I) • Pull the release keys to unseat the unit. Fuse (10 A) Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. © Slide the unit out of the mounting. 13