AIWA NSX-V2100 Operating Instructions - Page 13

About cassette tapes q To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool. Side A Tab for side A To record on the tape again, cover the tab openings with adhesive tape, etc. q 120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended. q Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism. SETTING THE SLEEIP TIMER 1 2 The unit can be turned off automatically at a specified time. Use the remote control. 1 Press the SLEEP button while pressing the SHIFT button. To erase a recording A previous recording is erased when a new recording is made on that part of that tape. 1 Insert the tape you want to erase into deck 1. 2 Press the TAPE button. 3 Wind up the tape to the point where the erasure is to be started. 4 Press lhe q button on deck 1 to start erasure. 2 Within 4 seconds, press the +< or b> button to specify the time until the power is turned off. Each time the button is pressed, the time changes between 5 and 240 minutes in 5-minute steps. u Specified time While the timer is in operation, the display indication is dimmer than usual. To check the time remaining until the power is turned off Press the SLEEP button once while pressing the SHIFT button. The remaining time is displayed for 4 seconds. To cancel the sleep timer Press the SLEEP button twice while pressing the SHIFT button so that "SLEEP on the display disappears. COPYRIGHT Please check the laws on copyright relating to recordings from discs, ri~dio or external tape for the country in which the machine is being used. ENGLISH 12