AIWA NSX-V2100 Operating Instructions - Page 5
Before, Operation, Setting, The Clock - remote
View all AIWA NSX-V2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
BEFORE OPERATION l= __-. POWER ~[-,f==1p-0=-"7+"-'-!mo-=r--i~.=j,.=@S=HIFT4 \_____ FUNCTION k~A -! To turn the unit on Press one (ofthe function buttons (TAPE, TUNER, VI DEO/AUX, CD)-The unit is turned on. At this time, playback of the inserted disc begins, or the previously tuned station is received (Direct Play Function). The POWER button is also available to turn the unit on. SETTING THE CLOCK CLOCK SHIFT Set the time as follows while the power is off. 1 Press the II SET button. The hour flashes. The disc compartment may open and close to reset the unit, when the unit is turned on. After use Press the POWER button to turn off the power. The display changes to the clock. DEMO (Demonstration) mode When the AC cord is connected for the first time, the display window demonstrates the functions of the unit. When the power is turned on, the DEMO display is overridden by the operation display. To cancel DEMO mode Press the II SET button while the power is off. In this time, the clock on the display flashes. Go to step 2 of the SETTING THE CLOCK to set the clock, To use the SHIFT button on the remote control Buttons @ have two different functions. One of these functions is indicated on the button, and the other on the plate above the button. To use the function on the button, simply press the button. To use the function on the plate above the button, press the button while pressing the SHIFT button. To use the FUNCTION button on the remote control The FUNCTION button substitutes for the function buttons (TAPE/DE(;K 1/2, TUNER, VIDEO/AUX,CD) on the main unit. Each time the FUNCTION button is pressed, the next function is selected cyclically. q If the unii. is not going to be used for an extended period of time, remove the batteries from the remote control to prevent possible electrolyte leakage. q The remote control may not operate correctly when: - The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight - Other remote controls are used nearby (television, etc.) 2 Press the l