AIWA XC-RW700 Operating Instructions - Page 12

Loading discs - compact disc recorder

Page 12 highlights

LOADING DISCS 2,4 2,4 INFORMATION DISPLAY When the disc is loaded, the type or status of disc is displayed as follows: 2,4 Conventional audio CD, finalized CD-R or CD- RW disc "TOC" will flash while the unit reads the disc's Table Of Contents information. 1 Play deck Record deck 1 6STANDBY/ON 1 Press POWER on the front panel or remote control. 6STANDBY/ON will turn green, indicating that the unit is on and functioning. 2 Press appropriate z on the front panel or remote control to open the desired deck. 3 Load a disc with the label side up. The play deck may not play the CD-R/RW discs, unless they are finalized.You can play them in the record deck. zOPEN/CLOSE Table Of Contents The total number of tracks and the total time of all tracks will be displayed. "CD" will also light to indicate that a conventional audio CD is in use. "CD" lights Total number of tracks Total time of all tracks Non-finalized CD-R or CD-RW disc "OPC" will be displayed once "TOC" has been read. OPC determines the intensity and duration of the recording laser beam that is best for the currently loaded disc. 4 Press appropriate z to close the desired deck. You can also close the deck by gently pressing on the outside of the disc tray. NOTE • Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. It may cause malfunction. • Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may cause malfunction. • When loading an 8-cm (3-inch) disc, put it on the inner circle of the tray. • Do not place more than one compact disc on one disc tray. • Do not tilt the unit with discs loaded. Doing so may cause malfunctions. Optimum Power Control The total number and total time of all tracks that have already been recorded will be displayed, and the appropriate indicator will light if a CD-R or CD-RW disc is in use. "CD -R" or "CD -RW" lights Total number of tracks Total time of all tracks Computer data disc "DATA" and "DISC" will be displayed alternatively when there is an error. Data discs will not play and may not be recorded or dubbed in this unit. 12 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

12
ENGLISH
LOADING DISCS
1
Press POWER on the front panel or remote
control.
6
STANDBY/ON
will turn green, indicating that the unit
is on and functioning.
2
Press appropriate
z
on the front panel or
remote control to open the desired deck.
3
Load a disc with the label side up.
The play deck may not play the CD-R/RW discs, unless
they are finalized. You can play them in the record deck.
z
OPEN/CLOSE
4
Press appropriate
z
to close the desired deck.
You can also close the deck by gently pressing on the
outside of the disc tray.
NOTE
• Do not attach any seal or label to either side (the
recordable side or the labeled side) of a CD-R/RW disc.
It may cause malfunction.
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may cause malfunction.
• When loading an 8-cm (3-inch) disc, put it on the inner
circle of the tray.
• Do not place more than one compact disc on one disc
tray.
Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
INFORMATION DISPLAY
When the disc is loaded, the type or status of disc is
displayed as follows:
Conventional audio CD, finalized CD-R or CD-
RW disc
"TOC" will flash while the unit reads the disc's Table Of
Contents information.
The total number of tracks and the total time of all tracks
will be displayed. "CD" will also light to indicate that a
conventional audio CD is in use.
Non-finalized CD-R or CD-RW disc
"OPC" will be displayed once "TOC" has been read. OPC
determines the intensity and duration of the recording laser
beam that is best for the currently loaded disc.
The total number and total time of all tracks that have
already been recorded will be displayed, and the
appropriate indicator will light if a CD-R or CD-RW disc is
in use.
Computer data disc
"DATA" and "DISC" will be displayed alternatively when
there is an error. Data discs will not play and may not be
recorded or dubbed in this unit.
2,4
1
1
2,4
2,4
6
STANDBY/ON
Play deck
Record deck
Table Of Contents
Total number of tracks
Total time of all tracks
Optimum Power Control
"CD -R" or "CD -RW" lights
Total time of all tracks
Total number of tracks
"CD" lights