AIWA XC-RW700 Operating Instructions - Page 7

, cPLAY Press to play a CD in the play deck. . t/gSKIP/SEARCH Press and hold to play the disc in fast-forward mode. Press to move to the next track. INFORMATION DISPLAY / f/rSKIP/SEARCH Press and hold to play in fast-reverse mode. Press to move to the previous track. _ zOPEN/CLOSE Press to open the play deck. Press again to close the deck. 1 2 3 4 5 6 7 8 9 0 1 ! @ 3 # 6$ 8 % ^ 11 RANDOM Lights when random playback has been programmed for one of the CD decks. 2 COAXIAL Lights when signal from coaxial jacks is selected as the source. 33 PROG Lights when one of the CD decks is being programmed for playback options. 4 OPTICAL Lights when signal from optical jack (on the front panel or rear panel) is selected as the source. 5 ANALOG Lights when signal from analog jacks is selected as source. 66 REPEAT Lights when a repeat function is being used. 7 COPY PROHIBIT Lights when a recording is not possible due to the Serial Copy Management System (SCMS). 88 1 A-B ALL Displays the type of repeat function being used. 9 AUTO Lights when the automatic method of incrementing tracks is selected for a recording session. 0 DUAL Lights when the unit is playing in dual mode. ! ERASE Lights when a CD-RW disc is being erased. @ FINALIZE Lights when the unit is in the Finalization process. # RECORD Lights when making a recording and flashes while preparing to make a recording. $ SYNC Lights when the unit has been programmed for a CD sync recording. % DUBBING Lights when a dubbing is in progress between the two CD decks. ^ X2 X4 En Indicates which speed has been selected for dubbing recordings. && TIME Lights in conjunction with one of the time indicators TRACK, TOTAL, REMAIN, to show which of the time status mode is active. ** REMAIN Lights when the information display shows the time remaining on a disc. (( Status display Displays the disc playing time and messages about the discs recordings. )) TOTAL Lights when the information display shows the total time of all tracks on a disc. -- TRACK Lights when the information display shows the running time of the individual track being played. = -RW Indicates the type of disc in the record deck. When a CD-R disc is in use, only "-R" is lit. When a CD- RW disc is in use, "-RW" is lit. [[ CD Lights when a conventional audio CD is playing in the CD deck. ] SRC Lights when the Sample-Rate Converter is in use. \\ Level indicators Displays the input/output level during an analog recording. ;; Play/Pause indicator Indicates the status of the individual CD decks. 7 ENGLISH