AMD ADA4200DAA5BV Builders Guide - Page 43

Builder's Guide for AMD Athlon™ 64 Processor, Based Desktops and Workstations, Appendix

Get AMD ADA4200DAA5BV - Athlon 64 X2 2.2 GHz Processor PDF manuals and user guides
UPC - 683728133160
View all AMD ADA4200DAA5BV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

31684 Rev. 3.00 September 2004 Builder's Guide for AMD Athlon™ 64 ProcessorBased Desktops and Workstations 21. Make sure the system starts and runs reliably with just the graphics card installed. Restart and run the system multiple times. 22. Use the following steps to install additional cards at this time, if additional cards are to be installed. a. Turn off the system and unplug it before installing each card. b. Install additional cards one at a time. c. Restart the system after every card installation. Note: If you have difficulties with the installation of any of the cards or drivers, contact your hardware vendor. 23. As you install each card, verify the card is properly seated (connector fully inserted into the slot, front and back) and that the retention screws are in place. 24. Test the complete system for proper operation. If system functions properly, load any other software. Appendix A AMD Athlon™ 64 43 Processor-Based System Build Procedure

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
31684
Rev. 3.00
September 2004
Builder’s Guide for AMD Athlon™ 64 Processor-
Based Desktops and Workstations
21.
Make sure the system starts and runs reliably with just the graphics card installed. Restart and
run the system multiple times.
22.
Use the following steps to install additional cards at this time, if additional cards are to be
installed.
a.
Turn off the system and unplug it before installing each card.
b.
Install additional cards one at a time.
c.
Restart the system after every card installation.
Note:
If you have difficulties with the installation of any of the cards or drivers, contact your
hardware vendor.
23.
As you install each card, verify the card is properly seated (connector fully inserted into the
slot, front and back) and that the retention screws are in place.
24.
Test the complete system for proper operation. If system functions properly, load any other
software.
Appendix A
AMD Athlon™ 64
Processor-Based System Build Procedure
43