ASRock 775XFire-VSTA Quick Installation Guide - Page 21
English, 7 Surround Display Feature, 8 Jumpers Setup
View all ASRock 775XFire-VSTA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2.7 Surround Display Feature This motherboard supports Surround Display upgrade. With the external add-on PCI Express VGA card, you can easily enjoy the benefits of Surround Display n feature. For the detailed instruction, please refer to the document at the following e path in the Support CD: ..\ Surround Display Information 2.8 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is "Short". If no jumper cap is placed on pins, the jumper is "Open". The illustration shows a 3-pin jumper whose pin1 Short Open and pin2 are "Short" when jumper cap is placed on these 2 pins. Jumper Setting Description PS2_USB_PWR1 Short pin2, pin3 to enable (see p.2 No. 1) +5VSB (standby) for PS/2 or USB wake up events. Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power supply. b Clear CMOS (CLRCMOS1, 2-pin jumper) (see p.2 No. 10) 2-pin jumper Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short 2 pins on CLRCMOS1 for 5 seconds. English 21 ASRock 775XFire-VSTA Motherboard