ASRock 960GC-GS FX Quick Installation Guide - Page 15
Front Panel Audio Header - manual
View all ASRock 960GC-GS FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Serial ATA (SATA) Data Cable (Optional) USB 2.0 Headers (9-pin USB4_5) (see p.2 No. 18) (9-pin USB6_7) (see p.2 No. 17) USB_PWR P-4 P+4 GND DUMMY 1 GND P+5 P-5 USB_PWR Either end of the SATA data cable can be connected to the SATA2 hard disk or the SATA2 connector on this motherboard. Besides four default USB 2.0 ports on the I/O panel, there are three USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB8_9) (see p.2 No. 16) USB_PWR P-9 P+9 GND DUMMY 1 GND P+8 P-8 USB_PWR Front Panel Audio Header (9-pin HD_AUDIO1) (see p.2 No. 25) GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L This is an interface for the front panel audio cable that allows convenient connection and control of audio devices. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC'97 audio panel, please install it to the front panel audio header as below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for HD audio panel only. You don't need to connect them for AC'97 audio panel. E. To activate the front mic. For Windows® XP / XP 64-bit OS: Select "Mixer". Select "Recorder". Then click "FrontMic". 15 ASRock 960GC-GS FX Motherboard English