ASRock 990FX Extreme9 User Manual - Page 37
Onboard Headers and Connectors
View all ASRock 990FX Extreme9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2.10 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial ATA3 Connectors (SATA3_1_2: see p.14, No. 18) (SATA3_3_4: see p.14, No. 17) (SATA3_5_6: see p.14, No. 16) (SATA3_A1_A2: see p.14, No. 15) These eight Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate. SATA3_1 SATA3_3 SATA3_5 SATA3_A1 SATA3_2 SATA3_4 SATA3_6 SATA3_A2 Serial ATA (SATA) Data Cable (Optional) Either end of the SATA data cable can be connected to the SATA3 hard disk or the SATA3 connector on this motherboard. Serial ATA (SATA) Power Cable (Optional) connect to the SATA HDD power connector connect to the power supply Please connect the black end of SATA power cable to the power connector on each drive. Then connect the white end of SATA power cable to the power connector of the power supply. USB 2.0 Headers (9-pin USB4_5) (see p.14 No. 26) Besides four default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. 37