ASRock A320M-DVS R4.0 User Manual - Page 39
Step 3, standoff into the desired nut location
View all ASRock A320M-DVS R4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
C B A C B A C B A Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. C B A 20o English 34
English
34
A
B
C
Step 3
Move the standoff based on the
module type and length.
°e standoff is placed at the nut
location D by default. Skip Step 3
and 4
and go straight to Step
5
if you
are going to use the default nut.
Otherwise, release the standoff by
hand.
A
B
C
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot.
Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
A
B
C
A
B
C
20
o