ASRock A780FullHD Quick Installation Guide - Page 24
Front Panel Audio Header
View all ASRock A780FullHD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Serial ATA (SATA) Power Cable (Optional) connect to the SATA HDD power connector connect to the power supply USB 2.0 Headers (9-pin USB8_9) (see p.2 No. 23) (9-pin USB6_7) (see p.2 No. 21) Please connect the black end of SATA power cable to the power connector on each drive. Then connect the white end of SATA power cable to the power connector of the power supply. Besides six default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. Infrared Module Header (5-pin IR1) (see p.2 No. 28) Internal Audio Connectors (4-pin CD1) (CD1: see p.2 No. 27) Front Panel Audio Header (9-pin HD_AUDIO1) (see p.2, No. 26) This header supports an optional wireless transmitting and receiving infrared module. This connector allows you CD1 to receive stereo audio input from sound sources such as a CD-ROM, DVD-ROM, TV tuner card, or MPEG card. This is an interface for the front panel audio cable that allows convenient connection and control of audio devices. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC'97 audio panel, please install it to the front panel audio header as below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. 24 ASRock A780FullHD Motherboard English