ASRock ALiveNF6G-DVI Quick Installation Guide - Page 20
ALiveNF6G-DVI / ALiveNF6G-VSTA - vsta windows 7
View all ASRock ALiveNF6G-DVI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for HD audio panel only. You don't need to connect them for AC'97 audio panel. E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select Chipset Configuration. Set the Front Panel Control option from [Auto] to [Enabled]. F. Enter Windows system. Click the icon on the lower right hand taskbar to enter Realtek HD Audio Manager. Click "Audio I/O", select "Connector Settings" , choose "Disable front panel jack detection", and save the change by clicking "OK". System Panel Header (9-pin PANEL1) (see p.2/p.3 No. 18) This header accommodates several system front panel functions. Chassis Speaker Header (4-pin SPEAKER 1) (see p.2/p.3 No. 21) Please connect the chassis speaker to this header. Chassis Fan Connector (3-pin CHA_FAN1) (see p.2/p.3 No. 15) Please connect a chassis fan cable to this connector and match the black wire to the ground pin. CPU Fan Connector (4-pin CPU_FAN1) (see p.2/p.3 No. 5) 4 3 2 1 Please connect the CPU fan cable to this connector and match the black wire to the ground pin. Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3. Pin 1-3 Connected 3-Pin Fan Installation ATX Power Connector (20-pin ATXPWR1) (see p.2/p.3 No. 32) Please connect an ATX power supply to this connector. 20 ASRock ALiveNF6G-DVI / ALiveNF6G-VSTA Motherboard English