ASRock B250M-HDV Quick Installation Guide - Page 26
Step 3, Step 4, Step 5, Step 6
View all ASRock B250M-HDV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4 3 2 1 D C B A E D C B A C B A D NUT2 NUT1 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. English 24
24
English
3
2
4
1
Step 3
Move the stando´ based on the
module type and length.
Te stando´ is placed at the nut
location D by default. Skip Step 3 and
4
and go straight to Step
5
if you are
going to use the default nut.
Otherwise, release the stando´ by
hand.
B
C
D
A
Step 4
Peel o´ the yellow protective Flm on
the nut to be used. Hand tighten the
stando´ into the desired nut location
on the motherboard.
A
B
C
D
E
B
C
A
Step 5
Align and gently insert the M.2 (NG²²)
SSD module into the M.2 slot.
Please
be aware that the M.2 (NG²²) SSD
module only Fts in one orientation.
NUT1
NUT2
D
Step 6
³ighten the screw with a screwdriver
to secure the module into place. Please
do not overtighten the screw as this
might damage the module.