ASRock B450 Pro4 Quick Installation Guide - Page 32
²ront Panel Audio Header
View all ASRock B450 Pro4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Front Panel Audio Header (9-pin HD_AUDIO1) (see p.1, No. 26) GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L This header is for connecting audio devices to the front audio panel. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for the HD audio panel only. You don't need to connect them for the AC'97 audio panel. E. To activate the front mic, go to the "FrontMic" Tab in the Realtek Control panel and adjust "Recording Volume". Chassis Fan / Waterpump Fan Connectors (4-pin CHA_FAN1/WP) (see p.1, No. 27) (4-pin CHA_FAN2/WP) (see p.1, No. 18) (4-pin CHA_FAN3/WP) (see p.1, No. 17) FAN_SPEED_CONTROL CHA_FAN_SPEED FAN_VOLTAGE GND 43 21 Please connect fan cables 4 3 to the fan connectors and 2 1 match the black wire to the ground pin. FAN_SPEED_CONTROL CHA_FAN_SPEED FAN_VOLTAGE GND CPU Fan Connector This motherboard pro- (4-pin CPU_FAN1) (see p.1, No. 5) 1 GND vides a 4-Pin CPU fan 2 FAN_VOLTAGE 3 CPU_FAN_SPEED (Quiet Fan) connector. 4 FAN_SPEED_CONTROL If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3. English 30