ASRock B450 Pro4 Quick Installation Guide - Page 36
Step 3, Step 4, Step 5
View all ASRock B450 Pro4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
C B A C B A C B A Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location C by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. C B A 20o English 34
English
34
Step 3
Move the stando´ based on the
module type and length.
Te stando´ is placed at the nut
location C by default. Skip Step 3
and 4
and go straight to Step
5
if you
are going to use the default nut.
Otherwise, release the stando´ by
hand.
Step 4
Peel o´ the yellow protective Flm on
the nut to be used. Hand tighten the
stando´ into the desired nut location
on the motherboard.
Step 5
Gently insert the M.2 (NG²²) SSD
module into the M.2 slot. Please
be aware that the M.2 (NG²²) SSD
module only Fts in one orientation.
A
B
C
A
B
C
A
B
C
A
B
C
20
o