ASRock B550M-ITX/ac User Manual - Page 35
Front Panel Audio Header
View all ASRock B550M-ITX/ac manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
B550M-ITX/ac SATA3_4 SATA3_3 SATA3_2 SATA3_1 Serial ATA3 Connectors (SATA3_1_3: see p.7, No. 7) (SATA3_2_4: see p.7, No. 8) These four SATA3 connectors support SATA data cables for internal storage devices with up to 6.0 Gb/s data transfer rate. USB 2.0 Headers (9-pin USB_3_4) (see p.7, No. 11) DUMMY GND P+ P- USB_PWR GND P+ PUSB_PWR 1 There is one header on this motherboard. This USB 2.0 header can support two ports. USB 3.2 Gen1 Header (19-pin USB3_4_5) (see p.7, No. 9) 1 Dummy IntA_PB_D+ IntA_PB_D- GND IntA_PB_SSTX+ IntA_PB_SSTX- GND IntA_PB_SSRX+ IntA_PB_SSRX- Vbus IntA_PA_D+ IntA_PA_DGND IntA_PA_SSTX+ IntA_PA_SSTXGND IntA_PA_SSRX+ IntA_PA_SSRX- Vbus There is one header on this motherboard. This USB 3.2 Gen1 header can support two ports. Front Panel Audio Header OUT_DETECT (9-pin HD_AUDIO1) (see p.7, No. 15) MIC2_DETECT N/A AGND_A OUT L AGND_A OUT R MIC2-R MIC2-L This header is for connecting audio devices to the front audio panel. 1 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for the HD audio panel only. You don't need to connect them for the AC'97 audio panel. E. To activate the front mic, go to the "FrontMic" Tab in the Realtek Control panel and adjust "Recording Volume". English 29