ASRock Fatal1ty H170 Performance/Hyper User Manual - Page 66

Long Duration Power Limit, Intel Turbo Boost Technology

Get ASRock Fatal1ty H170 Performance/Hyper PDF manuals and user guides View all ASRock Fatal1ty H170 Performance/Hyper manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

tests. Disable to achieve higher clock speeds when overclocking. CPU Amplitude Configure the CPU Amplitude. CPU Slew Rate Adjust the BCLK signal by defining the maximum change rate of the output voltage. Higher values will result in a shorter signal rising time. CPU PLL ORT Overshoot Reduction Technology improves the BCLK signal to decrease overshoot/ undershoot. Divider The default is set to 4 where the max BCLK is 300 MHz, while divider 12 lowers the max BCLK to 170 MHz, and divider 2 turns it into 300+ MHz. Boot Performance Mode Select the performance state that the BIOS will set before OS handoff. FCLK Frequency Configure the FCLK Frequency. Intel SpeedStep Technology Intel SpeedStep technology allows processors to switch between multiple frequencies and voltage points for better power saving and heat dissipation. Intel Turbo Boost Technology Intel Turbo Boost Technology enables the processor to run above its base operating frequency when the operating system requests the highest performance state. Long Duration Power Limit Configure Package Power Limit 1 in watts. When the limit is exceeded, the CPU ratio will be lowered after a period of time. A lower limit can protect the CPU and save power, while a higher limit may improve performance. Long Duration Maintained Configure the period of time until the CPU ratio is lowered when the Long 58 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
58
English
tests. Disable to achieve higher clock speeds when overclocking.
CPU Amplitude
Configure the CPU Amplitude.
CPU Slew Rate
Adjust the BCLK signal by defining the maximum change rate of the output voltage.
Higher values will result in a shorter signal rising time.
CPU PLL ORT
Overshoot Reduction Technology improves the BCLK signal to decrease overshoot/
undershoot.
Divider
°e default is set to 4 where the max BCLK is 300 MHz, while divider 12 lowers the
max BCLK to 170 MHz, and divider 2 turns it into 300+ MHz.
Boot Performance Mode
Select the performance state that the BIOS will set before OS handoff.
FCLK Frequency
Configure the FCLK Frequency.
Intel SpeedStep Technology
Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency
when the operating system requests the highest performance state.
Long Duration Power Limit
Configure Package Power Limit 1 in watts. When the limit is exceeded, the CPU
ratio will be lowered aſter a period of time. A lower limit can protect the CPU and
save power, while a higher limit may improve performance.
Long Duration Maintained
Configure the period of time until the CPU ratio is lowered when the Long