ASRock H310CM-DVS User Manual - Page 50
ODT WR CH
View all ASRock H310CM-DVS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
H310CM-HDV / H310CM-DVS Advanced Setting ODT WR (CH A) Configure the memory on die termination resistors' WR for channel A. ODT PARK (CH A) Configure the memory on die termination resistors' PARK for channel A. ODT NOM (CH A) Use this to change ODT (CH A) Auto/Manual settings. The default is [Auto]. Dll Bandwidth 0 Configure the Dll Bandwidth 0. Dll Bandwidth 1 Configure the Dll Bandwidth 1. Dll Bandwidth 2 Configure the Dll Bandwidth 2. Dll Bandwidth 3 Configure the Dll Bandwidth 3. Command Tristate Configure the Command Tristate Support. Realtime Memory Timing Configure the realtime memory timings. [Enabled] The system will allow performing realtime memory timing changes after MRC_DONE. MRC Fast Boot Enable Memory Fast Boot to skip DRAM memory training for booting faster.Save User Default Type a profile name and press enter to save your settings as user default. Voltage Configuration DRAM Voltage Use this to configure DRAM Voltage. The default value is [Auto]. 45 English