ASRock H510M/ac User Manual - Page 34
Chassis/Water Pump Fan
View all ASRock H510M/ac manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
H510M/ac Front Panel Audio Header (9-pin HD_AUDIO1) (see p.6, No. 18) GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L This header is for connecting audio devices to the front audio panel. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for the HD audio panel only. You don't need to connect them for the AC'97 audio panel. E. To activate the front mic, go to the "FrontMic" Tab in the Realtek Control panel and adjust "Recording Volume". Chassis Fan Connector (4-pin CHA_FAN2) (see p.6, No. 4) 4 3 21 FAN_SPEED_CONTROL CHA_FAN_SPEED +12V GND Please connect fan cable to the fan connector and match the black wire to the ground pin. Chassis/Water Pump Fan 1 2 Connector 3 (4-pin CHA_FAN1/WP) 4 (see p.6, No. 19) GND FAN_VOLTAGE CHA_FAN_SPEED FAN_SPEED_CONTROL This motherboard provides six 4-Pin water cooling chassis fan connectors. If you plan to connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3. 25 English