ASRock K7Upgrade-880 User Manual - Page 17
CPU Multiplier Jumper
View all ASRock K7Upgrade-880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CPU Multiplier Jumper (J1, 5 x 3-pin) (see p.8, No. 3) FID4 1 FID3 1 FID2 1 FID1 1 FID0 1 Note: The set of CPU Multiplier Jumper is only for advanced users to adjust the multiplier of CPU. Please follow the table below to adjust the multiplier of CPU. However, the system will work well without the adjustment of multiplier. You do not have to adjust the multiplier for normal usage. Multiplier 5x 5.5x 6x 6.5x 7x 7.5x 8x 8.5x 9x 9.5x 10x 10.5x 11x 11.5x 12x 12.5x 13x 13.5x 14x 15x 16x 16.5x 17x 18x 19x 20x 21x 22x 23x 24x FID0 2-3 1-2 2-3 1-2 2-3 1-2 2-3 1-2 2-3 1-2 2-3 1-2 2-3 1-2 2-3 1-2 2-3 1-2 2-3 2-3 2-3 1-2 2-3 1-2 1-2 1-2 1-2 1-2 2-3 1-2 FID1 2-3 2-3 1-2 1-2 2-3 2-3 1-2 1-2 2-3 2-3 1-2 1-2 2-3 2-3 1-2 1-2 2-3 2-3 1-2 2-3 1-2 1-2 2-3 2-3 2-3 1-2 1-2 2-3 1-2 1-2 FID2 1-2 1-2 1-2 1-2 2-3 2-3 2-3 2-3 1-2 1-2 1-2 1-2 2-3 2-3 2-3 2-3 1-2 1-2 1-2 2-3 2-3 2-3 1-2 1-2 2-3 2-3 1-2 2-3 1-2 1-2 FID3 2-3 2-3 2-3 2-3 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 2-3 2-3 2-3 2-3 2-3 2-3 2-3 1-2 1-2 1-2 1-2 1-2 2-3 2-3 2-3 1-2 1-2 1-2 FID4 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 For example, "Athlon XP 2000+" is an 1666MHz CPU: 12.5 (Multiplier) X 133MHz (External frequency) = 1666MHz FID jumpers setting: FID4 1 FID3 1 FID2 1 FID1 1 FID0 1 The jumper caps are not provided by ASRock. Please understand that ASRock does not guarantee and support the adjustment of multiplier. These jumpers setting may not apply to all multiplier-locked or even some unlocked AMD CPU. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU. 17