ASRock K7Upgrade-880 User Manual - Page 30

AGP Mode The default value of this feature is set to [Auto]. If you install an 8X-AGP card on this motherboard, you may select [Auto], [8X] or [4X] as the AGP mode. If the installed AGP card is a 4X-AGP card, then you may set the AGP mode as [Auto], [4X], [2X], or [1X]. AGP Fast Write This allows you to enable or disable the feature of AGP fast write protocol support. IDE Driving Strength Select [Normal] or [Strong] for IDE driving strength. PCI Delay Transaction Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when using ISA cards that are not PCI 2.1 compliant. OnBoard LAN This allows you to enable or disable the onboard LAN feature. OnBoard AC'97 Audio Select [Enabled] or [Disabled] for the onboard AC'97 Audio feature. If you use an AMD 754-Pin CPU on the ASRock 754Bridge, which is installed into the K8 BRIDGE on this motherboard, you will see the below screen and configuration options for the Chipset Configuration. BIOS SETUP UTILITY Advanced Chipset Settings VCCM Primary Graphics Adapter AGP Aperture Size AGP Mode AGP Fast Write [Auto] [PCI] [64 MB] [Auto] [Disabled] IDE Drive Strength PCI Delay Transaction OnBoard LAN OnBoard AC'97 Audio [High] [Disabled] [Enabled] [Enabled] HT Width HT Speed [Auto] [Auto] To set DRAM Voltage. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. VCCM Use this to select VCCM voltage. Configuration options are [Auto], [High], and [Low]. The default value is [Auto]. 30