ASRock K8Upgrade-VM800 User Manual - Page 17

Serial ATA (SATA) Power Cable (Optional) connect to the SATA HDD power connector connect to the power supply Please connect the black end of SATA power cable to the power connector on each drive. Then connect the white end of SATA power cable to the power connector of the power supply. USB 2.0 Header (9-pin USB67) (see p.8 No. 21) USB_PWR P-6 P+6 GND DUMMY 1 GND P+7 P-7 USB_PWR ASRock I/O PlusTM accommodates 6 default USB 2.0 ports. If those USB 2.0 ports on the I/O panel are not sufficient, this USB 2.0 header is available to support 2 additional USB 2.0 ports. Shared USB 2.0 Header (9-pin USB45) (see p.8 No. 33) 1 USB_PWR P-4 P+4 GND USB_PWR P-5 P+5 GND DUMMY This USB45 header is shared with the USB 2.0 ports 4,5 on ASRock I/O PlusTM. When using the front panel USB ports by attaching the front panel USB cable to this header (USB45), the USB ports 4,5 on ASRock I/O PlusTM will not be able to function. Infrared Module Header (5-pin IR1) (see p.8 No. 9) Internal Audio Connectors (4-pin CD1, 4-pin AUX1) (CD1: see p.8 No. 32) (AUX1: see p.8 No. 31) IRTX +5V DUMMY 1 GND IRRX CD-R GND GND CD-L AUX-R GND GND AUX-L CD1 AUX1 This header supports an optional wireless transmitting and receiving infrared module. These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, DVD-ROM, TV tuner card, or MPEG card. Front Panel Audio Header (9-pin AUDIO1) (see p.8 No. 29) GND +5VA BACKOUT-R BACKOUT-L 1 A U D - O U T- L GND A U D - O U T- R MIC-POWER MIC This is an interface for front panel audio cable that allows convenient connection and control of audio devices. 17