ASRock K8Upgrade-VM800 User Manual - Page 27

MA Timing Use this to adjust values for MA timing. Configuration options: [2T], [1T]. The default value is [2T]. 3.3.2 Chipset Configuration Advanced Chipset Settings BIOS SETUP UTILITY To set DRAM Voltage. DRAM Voltage AGP Voltage Onboard AGP Share Memory Primary Graphics Adapter AGP Aperture Size AGP Mode AGP Fast Write IDE Drive Strength PCI Delay Transaction OnBoard LAN OnBoard AC'97 Audio OnBoard MC'97 Modem HT Width HT Speed [Auto] [Auto] [Auto] [PCI] [64 MB] [Auto] [Disabled] [Normal] [Disabled] [Enabled] [Auto] [Auto] [Auto] [Auto] +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. DRAM Voltage Use this to select DRAM voltage. Configuration options are [Auto], [High], and [Low]. The default value is [Auto]. AGP Voltage Use this to select among [Normal] and [High] for AGP Voltage. The default value is [Auto]. Onboard AGP Share Memory You may select [Auto], [8MB], [16MB], [32MB], or [64MB] as the Onboard AGP share Memory. The default value of this feature is set to [Auto]. When the total memory is equal or above 256MB, the share memory size will be [64MB]; otherwise, please set the share memory size to [32MB]. Primary Graphics Adapter This item will switch the PCI Bus scanning order while searching for video card. It allows you to select the type of Primary VGA in case of multiple video controllers. AGP Aperture Size It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP card's specifications requires other sizes. 27