ASRock N3700M User Manual - Page 21

A´X Power Connector, Chassis Fan Connector

Get ASRock N3700M PDF manuals and user guides View all ASRock N3700M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

N3700M N3150M N3050M 1. High Deinition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for the HD audio panel only. You don't need to connect them for the AC'97 audio panel. E. To activate the front mic, go to the "FrontMic" Tab in the Realtek Control panel and adjust "Recording Volume". Chassis Speaker Header (4-pin SPEAKER1) (see p.5, No. 8) Chassis Fan Connector (3-pin CHA_FAN1) (see p.5, No. 6) CPU Fan Connector (3-pin CPU_FAN1) (see p.5, No. 3) ATX Power Connector (24-pin ATXPWR1) (see p.5, No. 5) DUMMY SPEAKER 1 +5V DUMMY Please connect the chassis speaker to this header. GND FAN_VOLTAGE FAN_SPEED Please connect fan cable to the fan connector and match the black wire to the ground pin. GND FAN_VOLTAGE FAN_SPEED Please connect the CPU fan cable to the connector and match the black wire to the ground pin. 12 24 1 13 his motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13. English 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
16
English
N3700M
N3150M
N3050M
Chassis Speaker ³eader
(4-pin SPEAKER1)
(see p.5, No. 8)
Please connect the chassis
speaker to this header.
Chassis Fan Connector
(3-pin C³A_FAN1)
(see p.5, No. 6)
Please connect fan cable
to the fan connector and
match the black wire to
the ground pin.
CPU Fan Connector
(3-pin CPU_FAN1)
(see p.5, No. 3)
Please connect the CPU
fan cable to the connector
and match the black wire
to the ground pin.
A´X Power Connector
(24-pin A´XPWR1)
(see p.5, No. 5)
His motherboard pro-
vides a 24-pin A´X power
connector. ´o use a 20-pin
A´X power supply, please
plug it along Pin 1 and Pin
13.
12
1
24
13
1
+5V
DUMMY
DUMMY
SPEAKER
1.
³igh DeInition Audio supports Jack Sensing, but the panel wire on the chassis must
support ³DA to function correctly. Please follow the instructions in our manual and
chassis manual to install your system.
2. ±f you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_±N (M±C) to M±C2_L.
B. Connect Audio_R (R±N) to OU²2_R and Audio_L (L±N) to OU²2_L.
C. Connect Ground (GND) to Ground (GND).
D. M±C_RE² and OU²_RE² are for the ³D audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. ²o activate the front mic, go to the “FrontMic” ²ab in the Realtek Control panel
and adjust “Recording Volume”.
GND
FAN_VOLTAGE
FAN_SPEED
GND
FAN_VOLTAGE
FAN_SPEED