ASRock P4i45PE R3.0 User Manual - Page 24

Con SDRAM Timing by SPD, SDRAM RAS# Precharge, SDRAM Precharge Delay, Resource Configuration,

Get ASRock P4i45PE R3.0 PDF manuals and user guides View all ASRock P4i45PE R3.0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Configure SDRAM Timing by SPD: Select [Enabled] will configure the following 3 items by the contents in the SPD (Serial Presence Detect) device. SDRAM RAS# Precharge: This controls the idle clocks after a precharge command is issued. SDRAM RAS# to CAS# Delay: This controls the latency between the SDRAM active command and the read / write command. SDRAM Precharge Delay: This controls the number of DRAM clocks for RAS minimum. Resource Configuration: Advanced AMIBIOS SETUP UTILITY - VERSION 3.31a Resource Configuration [ Setup Help ] PCI Latency Timer (PCI Clocks) 32 Primary Graphics Adapter PCI to select PCI clocks. Leave on default setting for the best PCI performance. F1:Help Esc:Previous Menu :Select Item +/-:Change Values Enter:Select Sub-Menu F9:Setup Defaults F10:Save & Exit PCI Latency Timer (PCI Clocks): The default is 32. We recommend you to keep the default value unless your PCI expansion cards' specifications require other settings. Primary Graphics Adapter: Select PCI or AGP as the primary graphics adapter. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
24
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
PCI Latency Timer (PCI Clocks)
Primary Graphics
Adapter
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Resource Configuration
PCI
32
<Enter> to select PCI
clocks. Leave on
default setting for the
best PCI performance.
Configure SDRAM Timing by SPD:
Select [Enabled] will configure the
following 3 items by the contents in the SPD (Serial Presence Detect)
device.
SDRAM RAS# Precharge:
This controls the idle clocks after a precharge command is issued.
SDRAM RAS# to CAS# Delay:
This controls the latency between the SDRAM active command and
the read / write command.
SDRAM Precharge Delay:
This controls the number of DRAM clocks for RAS minimum.
Resource Configuration:
PCI Latency Timer (PCI Clocks):
The default is 32. We recommend you to
keep the default value unless your PCI expansion cards’ specifications
require other settings.
Primary Graphics Adapter:
Select PCI or AGP as the primary graphics adapter.