ASRock QC5000-ITX/WiFi Quick Installation Guide - Page 24
CPU Fan Connector
![]() |
View all ASRock QC5000-ITX/WiFi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for the HD audio panel only. You don't need to connect them for the AC'97 audio panel. E. To activate the front mic, go to the "FrontMic" Tab in the Realtek Control panel and adjust "Recording Volume". Chassis Speaker Header (4-pin SPEAKER1) (see p.1, No. 12) DUMMY SPEAKER 1 +5V DUMMY Please connect the chassis speaker to this header. Chassis Fan Connectors (4-pin CHA_FAN1) (see p.1, No. 4) (3-pin CHA_FAN2) (see p.1, No. 6) 1 GND 2 +12V 3 FAN_SPEED 4 FAN_SPEED_CONTROL GND +12V FAN_SPEED Please connect fan cables to the fan connectors and match the black wire to the ground pin. CPU Fan Connector (3-pin CPU_FAN1) (see p.1, No. 13) FAN_SPEED FAN_VOLTAGE GND ATX Power Connector (24-pin ATXPWR1) (see p.1, No. 5) 12 24 1 13 Please connect fan cables to the fan connectors and match the black wire to the ground pin. This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13. 22 English
![](/manual_guide/products/asrock-qc5000itxwifi-quick-installation-guide-28b2081/24.png)