ASRock TRX40 Creator User Manual - Page 44
-Way SLI, and 4-Way SLI, Operation Guide, Installing Two SLI, Ready Graphics Cards, Step 1
View all ASRock TRX40 Creator manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
TRX40 Creator 2.8 SLITM, 3-Way SLITM and 4-Way SLITM Operation Guide This motherboard supports NVIDIA® SLITM, 3-way SLITM and 4-way SLITM (Scalable Link Interface) technology that allows you to install up to four identical PCI Express x16 graphics cards. Requirements 1. You should only use identical SLITM-ready graphics cards that are NVIDIA® certi- fied. 2. Make sure that your graphics card driver supports NVIDIA® SLITM technology. Download the drivers from the NVIDIA® website: www.nvidia.com 3. Make sure that your power supply unit (PSU) can provide at least the minimum power your system requires. It is recommended to use a NVIDIA® certified PSU. Please refer to the NVIDIA® website for details. 2.8.1 Installing Two SLITM-Ready Graphics Cards Step 1 Insert one graphics card into PCIE1 slot and the other graphics card to PCIE3 slot. Make sure that the cards are properly seated on the slots. Step 2 If required, connect the auxiliary power source to the PCI Express graphics cards. 37 English