ASRock X299 Taichi CLX User Manual - Page 36
Warning: Please make, sure that the power cable, connected is for the CPU, and not the graphics,
View all ASRock X299 Taichi CLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
ATX 12V Power 8 5 Connectors (8-pin ATX12V1) 4 1 (see p.8, No. 4) (8-pin ATX12V2) (see p.8, No. 3) This motherboard provides two 8-pin ATX 12V power connectors. To use a 4-pin ATX power supply, please plug it along Pin 1 and Pin 5. *Warning: Please make sure that the power cable connected is for the CPU and not the graphics card. Do not plug the PCIe power cable to this connector. SPI TPM Header (13-pin SPI_TPM_J1) (see p.8, No. 20) SPI_DQ3 +3.3V Dummy CLK SPI_MOSI RST# TPM_PIRQ 1 SPI_TPM_CS# GND RSMRST# SPI_MISO SPI_CS0 SPI_DQ2 This connector supports SPI Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. Thunderbolt AIC Connector (5-pin TB1) (see p.8, No. 35) Please connect a Thunderbolt™ add-in card (AIC) to this 1 connector via the GPIO cable. *The Thunderbolt™ AIC card can be installed in the enabled PCIe slot (depending on CPU type). If you install CPU with 48 lanes, install the card to PCIE1, 2, 3 or 5 . If you install CPU with 44 lanes, install the card to PCIE1, 2, 3 or 5 . If you install CPU with 28 lanes, install the card to PCIE1, 2 or 3. English 30