ASRock Z170M-PIO2 User Manual - Page 28
Step 3, NGFF SSD module into the M.2
View all ASRock Z170M-PIO2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
B A B A B A B A B A Z170M-PIO2 Step 3 The standoff is placed at the nut location B by default. Skip Step 4 and go straight to Step 5 if your M.2_SSD (NGFF) module is type 2280. If your M.2_SSD (NGFF) module is type 2260, go to Step 4. Step 4 Peel off the yellow protective film on the nut location A. Hand tighten the standoff into the nut location A on the motherboard. Step 5 Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. English 23
23
English
Z170M-PIO2
Step 3
°e standoff is placed at the nut
location B by default. Skip Step 4 and
go straight to Step
5
if your M.2_SSD
(NGFF) module is type 2280. If your
M.2_SSD (NGFF) module is type
2260, go to Step 4.
Step 4
Peel off the yellow protective film on
the nut location A. Hand tighten the
standoff into the nut location A on
the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.
B
A
B
A
A
B
A
B
B
A