ASRock Z390 Phantom Gaming-ITX/ac Quick Installation Guide - Page 33
Step 3, Step 4, Step 5
View all ASRock Z390 Phantom Gaming-ITX/ac manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
1 2 1 Step 3 Before installing a M.2 (NGFF) SSD module, please loosen the screws to remove the M.2 heatsink. B A B A 30 Step 4 Move the standoff based on the module type and length. The standoff is placed at the nut location B by default. Skip Step 4 and 5 and go straight to Step 6 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 5 Tighten the standoff into the desired nut location on the motherboard. English
30
English
1
1
2
Step 3
Before installing a M.2 (NG²²) SSD
module, please loosen the screws to
remove the M.2 heatsink.
A
B
Step 4
Move the stando´ based on the
module type and length.
Te stando´ is placed at the nut
location B by default. Skip Step 4 and
5
and go straight to Step
6
if you are
going to use the default nut.
Otherwise, release the stando´ by
hand.
A
B
Step 5
³ighten the stando´ into the desired
nut location on the motherboard.