Aastra M6320 Meridian 6320 User Guide - Page 18

Setting up local features: continued Mode Selection The set has two operational modes Handsfree (default mode) and ACD mode. The handsfree mode is intended to give the user a high level of features, some of which are listed below. • Handsfree operation by pressing the selector key. • Dual headset working (only 1 operates in transmit mode) in conjunc- tion with the handset. In ACD mode the set is designed for call centre working and has the following design features: • Dual headset working (only 1 operates in transmit mode at a time). The speech transmit path can be switched between headsets using the selector key. To select the mode of operation: 1. Press b. 2. Press @ or left/right cursor keys until Mode Selection? is dis- played. 3. Press a or the down scroll key to show Handsfree Mode or ACD Mode. 4. Press @ or left/right cursor keys until the require mode is displayed. 5. Press a or the down scroll key to save the setting. 6. Press b or r to exit the program mode. Message Waiting To enable the large red LED at the top of the set to illuminate when a message is waiting, you will have to indicate to the phone which feature key is assigned to the network feature 'message waiting'. To program the message waiting key: 1. Press b. 2. Press @ or left/right cursor keys until Message Waiting? is displayed. 3. Press Hold a or the down scroll key to show Msg Wait key Unassigned. 4. Press a feature key to assign that key to the message waiting function or press r to unassign the function. 5. Press a or the down scroll key to save the setting. 6. Press b or r to exit the program mode. 17