Acer 710TE Service Guide - Page 56

Error Messages, No Beep Symptoms, No beep, power-on, indicator on, and a blank, LCD not POST

Page 56 highlights

Numeric error Codes Symptom / Error 02F5 DMA Test Failed 02F6 Software NMI Failed 02F7 Fail-Safe Timer NMI Failed Spare Part / Action in Sequence 1. DIMM 2. IMM (CPU board) 3. Main board 1. DIMM 2. IMM (CPU board) 3. Main board 1. DIMM 2. IMM (CPU board) 3. Main board Error Messages Symptom / Error Device Address Conflict Allocation Error for: device Failing Bits: nnnn Fixed Disk n Invalid System Configuration Data I/O device IRQ conflict Operating system not found Spare Part / Action in Sequence 1. Run "Load Setup Defaults" in BIOS Setup Utility. 2. Backup battery (RTC) 3. Main board 1. Run "Load Setup Defaults" in BIOS Setup Utility. 2. Backup battery (RTC) 3. Main board 1. DIMM 2. BIOS ROM 3. Main board 1. None 1. BIOS ROM 2. Main board 1. Run "Load Setup Defaults" in BIOS Setup Utility. 2. Backup battery (RTC) 3. Main board 1. Enter Setup and see if fixed disk and drive A: are properly identified. 2. Diskette Driver 3. Hard Disk 4. Main board No Beep Symptoms Symptom / Error No beep, power-on indicator on, and a blank LCD not POST Spare Part / Action in Sequence 1. Ensure every connector correctly 2. DIMM 3. Reseat IMM (CPU board) 4. IMM (CPU board) 5. Main board 4-10 EXTENSA 700/710 Service Guide

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.