Acer 710TE Service Guide - Page 63

Auto Test Performs multiple tests of the selected items and AUTO check the select test items in sequence. Note: PCMCIA Diagnostic Supports Manual test only. Do not select PCMCIA Diagnostic in Auto Test. The screen below appears if you select AUTO Test. PQA Vx_x xx-xx-xx Diag Resoult SysInfo Option Exit Diag MANUAL TEST AUTO TEST TEST COUNT VALUE (1...9999) 1 Specify the desired number of tests and press Enter. After you specify the number of tests to perform, the screen shows a list of test items (see below). PQA Vx_x xx-xx-xx Diag Resoult Diag MANUALTTeEstSITtems AUTO[ ] SytTeEmSBToard [ ] Memory [ ] Keyboard [ ] Video [ ] Parallel Port [ ] Serial Port [ ] Diskette Drive [ ] Hard Disk [ ] CD-ROM [ ] Coprocessor [ ] Pointing Dev. [ ] Cache SysInfo Option Exit SPACE: mark/ummark selecting item ESC : return to upper menu F2 : test the marked item(s) ENTER: open subitem's menu Test Times = 1 Move the highlight bar from one item to another. Press Space to enable or disable the item. Press Enter to view the available suboptions of each selected item. Press Esc to close the close the submenu. Chapter 4 4-17