Acer AC100S Acer AC100 Service Guide - Page 44
Removing the Memory Modules, Removing the Mainboard
View all Acer AC100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Removing the Memory Modules 1. See "Removing the Mainboard Tray" on page 32. 2. Press the holding clips on both sides of the DIMM slot outward to release the DIMM (1). 3. Gently pull the DIMM upward to remove it from the DIMM slot (2). 4. If there is a second memory module installed, repeat steps 12 and 13 to remove it. Note:Circuit boards >10 cm2 has been highlighted with the yellow rectangle as above image shows. Please detach the Circuit boards and follow local regulations for disposal. Removing the Mainboard 1. See "Removing the Mainboard Tray" on page 32. 2. Disconnect the front I/O cable connectors from its mainboard connectors (CN14 and CN15). 38 Chapter 5