Acer AL1713 AL1713bm/AL1713m User's Guide - Page 6
inactive, press once, then press the buttons marked <or > to adjust - lcd
View all Acer AL1713 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
(1) PowerC ode Audio cable (2) (Optional) (3) VGAC able Attach the monitor to the power cord which should then be inserted into a properly grounded electric socket. Connect the audio input socket of the LCD monitor and the computer by mens of the audio cable. Connect the signal cable to the VGA output socket of the graphics card on the computer. Then tighten the thumbscrews on the connector. WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches the shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged. Switching theP ower First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on the power button go green, this indicates the computer is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the green light on the power button or a video signal, check the connections. Adjusting display settings 1 Auto Auto configuration 2 < M inus 3 > Plus 4 Menu OSD manual 5 power If OSD is active, press to exit. If OSD is inactive, press and the monitor will automatically optimize the display position, clock and phase of your display. If OSD is active, press to select or adjust OSD options. If OSD is active, press to select or adjust OSD options. If OSD is inactive, press once, then press the buttons marked to adjust the volume. (this function is optional only for models with speakers) Press to view OSD. Press again to exit. Power on/off Green: power on Orange: in sleep mode OSD options Please refer to "External Controls" on Page 5. To adjust the OSD settings: 1. Press the MENU button to open the OSD menu. 2. Use the buttons marked < or >, to highlight a control, then press the MENU button to enter 3. Use the buttons marked < or >, to adjust the control to the desired level. 4. When you have finished making all selections, press the MENU button to exit the OSD. (Or the adjustment will auto-save after 45 seconds.) 5