Acer AL1716 AL1716W Service Guide - Page 10

Flat Panel Specification continued - al1716w

Page 10 highlights

2. Flat Panel Specification (continued) ACER AL1716W 9 Go to cover page 2.6.5 Chromaticity: The color chromaticity is measured by a photometer (CA-210) at 1440x900/60Hz mode and full white square pattern with contrast/brightness in default value. The x and y co-ordinates for sRGB, Reddish, Bluish and User preset mode shall be as below: 2.6.6 Brightness: The uniformity is determined by using a photometer (CA-210) to measure luminance on the center of screen after at least 30 minutes warm up. It shall be test at 1440x900/60Hz mode and the brightness and contrast OSD setting for 100%. The values specified are at an approximate distance 20cm from the LCD surface and at 0 viewing angle. The full screen white center luminance at user mode color temperature shall be 250 cd/m typ. and 200cd/m2 minimum (HSD170MGW1-A), and full screen black luminance center max. luminance

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.